This picture shows the water reservoir for the Vivarium water. This rollable container can hold quite an amount of water which is circulated through the vivarium by the small pump which connects to the waterfall.
The large pump connects to the back wall watering system. Since the pump height should be 6 foot or 1,80 Meter a large pump had to be bought with a pump height of 2,5 Meter or 8 foot. The back wall watering will operate only a few times a day, while the waterfall continuesly runs ( also during the night ). In this reservoir also an immersible water heater will be placed to keep the water temperature constant.
The grey PVC pipe is connected to the PVC structure of the back wall and provides the return overflow water from the vivarium. This overflow system will keep the vivarium water at a constant level, while the water level in the container will change. Since the container is moveable, it is easy to clean, fill and maintain the pumps if required.
This site can at best be seen in a framed form, in case you do not see the frame : click here and you will be rerouted
home
